Skip to content
AUMEX

Expertise

Metallurgy that fits the deposit.

We use proven carbon-based processes to dissolve, capture and recover gold. The right circuit depends on ore grade, tonnage and site — our technical team makes that call for every project.

Row of circular leaching tanks filled with yellow solution, hills behind
Fig. 01Leaching tanks

Small to mid-scale

CIC

Carbon-in-Column

A cost-effective process that uses a leach solution to dissolve gold from ore. The solution then passes through columns of activated carbon that capture the gold. Low environmental impact, and well suited to regions where traditional extraction methods are not feasible.

  • Low capital outlay
  • Lower water use
  • Fast to set up near the ore
Man standing on a steel walkway with yellow railings above the round tanks of a CIL/CIP plant
Fig. 02CIL/CIP tank plant

Larger, higher-grade deposits

CIL / CIP

Carbon-in-Leach & Carbon-in-Pulp

Leaching and adsorption combined in a single tank train (CIL) or run in separate chambers (CIP). Gold leached from the ore is adsorbed onto activated carbon, giving high recovery rates. More efficient for larger operations and high-grade ore.

  • High recovery rates
  • Continuous processing
  • Scales with throughput
Technician in a hard hat and high-visibility vest in front of elution columns
Fig. 03Elution columns on site

Gold Extraction

E / EW

Carbon Elution & Electrowinning

We strip gold from loaded carbon using ZADRA and AARL elution systems — safer, faster and more reliable for small and large operations. Our trained operators acid-wash and regenerate the carbon for re-use, then recover gold from the pregnant solution by electrowinning.

  1. 01Strip gold from loaded activated carbon
  2. 02Acid-wash the carbon to remove impurities
  3. 03Regenerate carbon to restore adsorption for the next run
  4. 04Recover gold from pregnant solution by electrowinning
  5. 05Monitor pH, pressure and temperature throughout
Driller standing beside a yellow drilling rig in a forest clearing
Fig. 04Exploration drilling — sampling for geochemical analysis

Scientific Analysis

LAB

Geo-Chemical Laboratory

Our laboratory tests samples of ore and tailings from prospective sites and partner mines. Geochemical and metallurgical analysis confirms the grade before a project starts, and ongoing testing guides the process on every run.

  • Ore and tailings analysis
  • Grade confirmed before investment
  • Testing on every run
Gold bar stamped with the Aumex logo, Aumex Mining & Extraction, fine gold 999.9, 1000 g
Fig. 05Aumex fine gold bar

Bullion Gold Production

Au

Gold Refinery

Gold recovered by electrowinning is smelted and refined into high-purity bullion, ready for sale to licensed, government-authorised buyers.

  • Smelting and refining
  • Purity checks
  • Sale to licensed buyers

04The full circuit

From pit to buyer, in order.

  1. 01

    Source

    Ore is collected in rock form from partner pits, contract mines and our own sites after geochemical sampling confirms grade.

  2. 02

    Crush

    Jaw crushers reduce run-of-mine rock to a consistent feed size for milling.

  3. 03

    Mill

    Ball mills grind the crushed ore fine enough to release the gold particles locked inside.

  4. 04

    Concentrate

    Gravity and centrifugal concentrators pull out free gold and upgrade the material before leaching.

  5. 05

    Leach

    The material is leached by CIC, CIL or CIP and the dissolved gold is adsorbed onto activated carbon.

  6. 06

    Elute

    ZADRA / AARL elution strips gold from the carbon into a pregnant solution. Carbon is acid-washed and regenerated.

  7. 07

    Recover

    Electrowinning recovers gold from solution, which is smelted into doré and sold to licensed, government-authorised buyers.

  8. Sold to licensed, government-authorised buyers.

Let’s start together

Have ore, land, or capital to put to work?

Investors, community miners and plant owners — tell us what you have and we’ll tell you how we’d approach it.